NTH29 Holster - tactical flashlight holster - Nitecore Singapore

A fast, secure home for your duty light

A side-lever lock holds your Nitecore P-series light through a shift, releases it one-handed, and rotates a full 360 degrees for hands-free lighting on the belt.

Fits Nitecore P27iX, P20iX, P23i and P20i UV (head 31.8 to 34mm, tube 25.4 to 26mm)
Side-lever locking mechanism for a one-handed draw and secure retention
360 degree rotation with 12 locking angles for hands-free lighting
PA66 nylon and glass fibre, 93g, 25 percent lighter than the NTH25
Rides on 38 to 50mm duty belts and MOLLE, with an adjustable stopper
Rated for use from -40 to 55 degrees Celsius

NTH29 Holster - dual-sided guide rollers for a smooth draw - Nitecore Singapore

Draw and reholster in one motion

Dual-sided guide rollers line the light into the holster so it seats cleanly every time, whether you are drawing at a vehicle stop or dropping it back on the move.

The side lever locks the light in place until you choose to release it, so a foot chase or a bend at the boot leaves it exactly where you put it.

NTH29 Holster - compatible with Nitecore P27iX P20iX P23i P20i UV - Nitecore Singapore

Built around the P-series duty lights

The NTH29 is shaped for the Nitecore P27iX, P20iX, P23i and P20i UV, so your patrol light drops straight in and sits secure.

Any of these lights with a head of 31.8 to 34mm and a tube of 25.4 to 26mm fits correctly, and the adjustable stopper fine-tunes the depth to your exact light.

NTH29 Holster - 360 degree rotation for hands-free lighting - Nitecore Singapore

Point the beam and keep your hands free

The holster rotates a full 360 degrees and locks at 12 angles, so you can aim the light while it stays on your belt.

Angle it forward for a search, down for paperwork at the boot, or up onto a panel during an inspection, all with both hands free for the task.

NTH29 Holster - fits 38 to 50mm belts and MOLLE systems - Nitecore Singapore

Rides where your kit already lives

The mount fits duty belts from 38 to 50mm and clips onto MOLLE webbing, so it sits on a full patrol rig or a plain leather belt just as easily.

An adjustable screw stopper sets the holster firm at the height and position you want, so it stays put through a long shift.

NTH29 Holster - 93g PA66 nylon and glass fibre build - Nitecore Singapore

Light on the belt, built for the field

Moulded from PA66 nylon and glass fibre, the NTH29 weighs 93g, a quarter lighter than the NTH25 it follows, so it earns its place on a loaded belt.

The same build shrugs off heavy daily use and holds up from -40 to 55 degrees Celsius, from a cold night watch to a hot vehicle cabin.

WHY THE NTH29 OVER AN ORDINARY POUCH

Locked, not just wedged in

A side-lever lock retains the light until you release it, where an open pouch relies on friction and can let a light bounce loose.

Draws clean every time

Dual-sided guide rollers smooth the draw and the reholster, so the light does not snag the way it can in a tight fabric sleeve.

Hands-free at any angle

360 degrees of rotation and 12 locking angles point the beam where you need it, where a fixed pouch only carries the light.

Light and weatherproof-tough

PA66 and glass fibre at 93g take a -40 to 55 degree range, lighter to carry than a leather rig and steadier than thin plastic.

WHO IT'S BUILT FOR

Law Enforcement & Security

Instant, retained access to your light on the duty belt during patrol, a vehicle stop or a perimeter sweep.

Tactical & EDC

Carry your P-series light on a normal 38 to 50mm belt, drawn one-handed and dropped back in by feel.

Outdoor & Utility Work

Rotate the light to any angle for hands-free lighting during inspections, repairs and night work.

COMPATIBLE FLASHLIGHTS

Compatible models	P27iX, P20iX, P23i, P20i UV
Head diameter	31.8 to 34mm (1.25 to 1.34")
Tube diameter	25.4 to 26mm (1.00 to 1.02")
Depth adjustment	Adjustable screw stopper

SPECIFICATIONS

Material	PA66 nylon and glass fibre
Dimensions	108 x 50 x 69mm (4.25 x 1.97 x 2.72")
Weight	93g (3.28 oz)
Belt compatibility	38 to 50mm (1.50 to 1.97")
Mounting	Belt loop and MOLLE
Rotation	360 degrees, 12 locking angles
Operating temperature	-40 to 55 degrees Celsius

FREQUENTLY ASKED QUESTIONS

Which flashlights fit the NTH29?

It is built for the Nitecore P27iX, P20iX, P23i and P20i UV. Any of these lights, with a head of 31.8 to 34mm and a tube of 25.4 to 26mm, seats correctly, and the adjustable stopper sets the depth to your exact light.

How does it attach to my belt or pack?

The mount fits belts from 38 to 50mm and clips onto MOLLE webbing, so it rides on a duty rig or a plain belt. The screw stopper locks it firm at the height and angle you set.

Will the light stay put if I run or bend down?

The side-lever lock holds the light in the holster until you release it, and the guide rollers keep the seat snug, so it stays put through movement and only comes out when you draw it.

NTH29 Holster - box contents - Nitecore Singapore

What's In The Box

1x NTH29 Tactical Flashlight Holster - side-lever lock, 360 degree rotation, belt and MOLLE mount

Keep your duty light fast to reach and locked in place.

GET YOUR NTH29 HOLSTER NOW

Holsters & Lanyards

Waterproof AA Battery Pod (8xAA)

Waterproof AA Battery Pod (4xAA)

NTH29 Holster