NIA007 - Extension Vacuum Kit (for BB Nano)
Turn your BB Nano into a vacuum
Blowing moves dust somewhere else. Sometimes you want it gone. The NIA007 clips onto the BB Nano you already own and reverses the job, pulling dust into a bin instead of scattering it across the room.
- Three-in-one kit: dust bin, extended silicone nozzle and brush nozzle
- 250-mesh filter keeps fine dust out of the blower's air duct
- Dust bin twists off in one motion for emptying
- Made for the BB Nano Electronic Dust Blower, sold separately from the blower
A three-in-one design that swaps in seconds
DUST BIN - The collected dust lands in a clear bin rather than back into the air. Rotate it to detach, tip it out, twist it back on. There is nothing to unscrew and no bag to buy.
250-MESH FILTER - Fine filtration sits between the bin and the motor, so the dust you pick up stays in the bin instead of working its way into the air duct. It is the same protective thinking as the blower's own intake filter, pointed the other way.
EXTENDED SILICONE NOZZLE - A long, soft taper for the narrow places a blower cannot reach into: between keycaps, down a seat rail, into a vent or a hinge.
BRUSH NOZZLE - Bristles loosen what has settled and stuck while the suction lifts it away in the same pass, which is what you want on fabric, trim and textured plastic.
WHERE IT EARNS ITS KEEP
| SETTING | WHAT THE KIT DOES |
| Camera bag | Lifts grit out of a bag base and off strap webbing rather than blasting it around the gear |
| Desk and keyboard | Brush nozzle loosens crumbs between keycaps while the bin catches them |
| Car interior | Extended nozzle reaches seat rails, vents and the gaps around the console |
| Workshop and home | Clears drill dust, shavings and the fine debris that a blower would only relocate |
KIT DETAILS
| Kit contents | Dust bin, 250-mesh filter, extended silicone vacuum nozzle, brush vacuum nozzle |
| Filter | 250 mesh |
| Dust bin | Rotate to detach |
| Compatibility | BB Nano Electronic Dust Blower |
| Sold as | Accessory kit. The BB Nano blower is a separate purchase |
FREQUENTLY ASKED QUESTIONS
Yes. The NIA007 is an attachment kit, not a standalone vacuum. It fits the BB Nano Electronic Dust Blower and uses that blower's motor and battery to generate suction.
You can. The kit swaps on when you want to vacuum and comes off when you want to blow, so one BB Nano covers both jobs. The blower keeps its own intake filter for blowing.
It collects in the clear dust bin behind the 250-mesh filter. Twist the bin off, empty it, twist it back on. The filter is what stops that dust from travelling on into the blower's air duct.
What's In The Box
- 1x Dust Bin (with 250-mesh filter)
- 1x Extended Silicone Vacuum Nozzle
- 1x Brush Vacuum Nozzle
The BB Nano blower is not included. This kit adds vacuuming to a BB Nano you already own.
Ready to Order?
Add to cartMore Images
NIA007 - Extension Vacuum Kit (for BB Nano)
Turn your BB Nano into a vacuum
Blowing moves dust somewhere else. Sometimes you want it gone. The NIA007 clips onto the BB Nano you already own and reverses the job, pulling dust into a bin instead of scattering it across the room.
- Three-in-one kit: dust bin, extended silicone nozzle and brush nozzle
- 250-mesh filter keeps fine dust out of the blower's air duct
- Dust bin twists off in one motion for emptying
- Made for the BB Nano Electronic Dust Blower, sold separately from the blower
A three-in-one design that swaps in seconds
DUST BIN - The collected dust lands in a clear bin rather than back into the air. Rotate it to detach, tip it out, twist it back on. There is nothing to unscrew and no bag to buy.
250-MESH FILTER - Fine filtration sits between the bin and the motor, so the dust you pick up stays in the bin instead of working its way into the air duct. It is the same protective thinking as the blower's own intake filter, pointed the other way.
EXTENDED SILICONE NOZZLE - A long, soft taper for the narrow places a blower cannot reach into: between keycaps, down a seat rail, into a vent or a hinge.
BRUSH NOZZLE - Bristles loosen what has settled and stuck while the suction lifts it away in the same pass, which is what you want on fabric, trim and textured plastic.
WHERE IT EARNS ITS KEEP
| SETTING | WHAT THE KIT DOES |
| Camera bag | Lifts grit out of a bag base and off strap webbing rather than blasting it around the gear |
| Desk and keyboard | Brush nozzle loosens crumbs between keycaps while the bin catches them |
| Car interior | Extended nozzle reaches seat rails, vents and the gaps around the console |
| Workshop and home | Clears drill dust, shavings and the fine debris that a blower would only relocate |
KIT DETAILS
| Kit contents | Dust bin, 250-mesh filter, extended silicone vacuum nozzle, brush vacuum nozzle |
| Filter | 250 mesh |
| Dust bin | Rotate to detach |
| Compatibility | BB Nano Electronic Dust Blower |
| Sold as | Accessory kit. The BB Nano blower is a separate purchase |
FREQUENTLY ASKED QUESTIONS
Yes. The NIA007 is an attachment kit, not a standalone vacuum. It fits the BB Nano Electronic Dust Blower and uses that blower's motor and battery to generate suction.
You can. The kit swaps on when you want to vacuum and comes off when you want to blow, so one BB Nano covers both jobs. The blower keeps its own intake filter for blowing.
It collects in the clear dust bin behind the 250-mesh filter. Twist the bin off, empty it, twist it back on. The filter is what stops that dust from travelling on into the blower's air duct.
What's In The Box
- 1x Dust Bin (with 250-mesh filter)
- 1x Extended Silicone Vacuum Nozzle
- 1x Brush Vacuum Nozzle
The BB Nano blower is not included. This kit adds vacuuming to a BB Nano you already own.
Ready to Order?
Add to cartProduct Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Turn your BB Nano into a vacuum
Blowing moves dust somewhere else. Sometimes you want it gone. The NIA007 clips onto the BB Nano you already own and reverses the job, pulling dust into a bin instead of scattering it across the room.
- Three-in-one kit: dust bin, extended silicone nozzle and brush nozzle
- 250-mesh filter keeps fine dust out of the blower's air duct
- Dust bin twists off in one motion for emptying
- Made for the BB Nano Electronic Dust Blower, sold separately from the blower
A three-in-one design that swaps in seconds
DUST BIN - The collected dust lands in a clear bin rather than back into the air. Rotate it to detach, tip it out, twist it back on. There is nothing to unscrew and no bag to buy.
250-MESH FILTER - Fine filtration sits between the bin and the motor, so the dust you pick up stays in the bin instead of working its way into the air duct. It is the same protective thinking as the blower's own intake filter, pointed the other way.
EXTENDED SILICONE NOZZLE - A long, soft taper for the narrow places a blower cannot reach into: between keycaps, down a seat rail, into a vent or a hinge.
BRUSH NOZZLE - Bristles loosen what has settled and stuck while the suction lifts it away in the same pass, which is what you want on fabric, trim and textured plastic.
WHERE IT EARNS ITS KEEP
| SETTING | WHAT THE KIT DOES |
| Camera bag | Lifts grit out of a bag base and off strap webbing rather than blasting it around the gear |
| Desk and keyboard | Brush nozzle loosens crumbs between keycaps while the bin catches them |
| Car interior | Extended nozzle reaches seat rails, vents and the gaps around the console |
| Workshop and home | Clears drill dust, shavings and the fine debris that a blower would only relocate |
KIT DETAILS
| Kit contents | Dust bin, 250-mesh filter, extended silicone vacuum nozzle, brush vacuum nozzle |
| Filter | 250 mesh |
| Dust bin | Rotate to detach |
| Compatibility | BB Nano Electronic Dust Blower |
| Sold as | Accessory kit. The BB Nano blower is a separate purchase |
FREQUENTLY ASKED QUESTIONS
Yes. The NIA007 is an attachment kit, not a standalone vacuum. It fits the BB Nano Electronic Dust Blower and uses that blower's motor and battery to generate suction.
You can. The kit swaps on when you want to vacuum and comes off when you want to blow, so one BB Nano covers both jobs. The blower keeps its own intake filter for blowing.
It collects in the clear dust bin behind the 250-mesh filter. Twist the bin off, empty it, twist it back on. The filter is what stops that dust from travelling on into the blower's air duct.
What's In The Box
- 1x Dust Bin (with 250-mesh filter)
- 1x Extended Silicone Vacuum Nozzle
- 1x Brush Vacuum Nozzle
The BB Nano blower is not included. This kit adds vacuuming to a BB Nano you already own.
