NUP30 - MOLLE Utility Pouch
A tough little pouch that carries your kit and sets up your way.
Wear the NUP30 cross-body, clip it to a pack on its side MOLLE, or drop it inside a bigger bag to keep small gear sorted.
- 19 x 28.5 x 7.5 cm (7.5 x 11.2 x 3.0"), around 190 g
- 600D polyester with a water and dirt resistant coating
- Side MOLLE webbing to attach it to a larger pack
- Laser-cut hook-and-loop panel on the front for patches and small modules
- Hook-and-loop main compartment that takes Nitecore modular inserts
- Auxiliary compartment with a key clasp and a mesh pocket
- Included adjustable cross-body strap for standalone carry
Carry it three ways.
Clip the included strap on and the NUP30 rides as a cross-body sling, sitting flat against your hip so a knife, torch and snacks stay within reach on the trail. The strap adjusts in length, so it sits where you want it across the body.
The side MOLLE webbing lets you mount it to a larger pack when you want it out of the way, and the slim 7.5 cm depth means it slips inside a bigger bag as an organiser when you would rather keep small items from drifting to the bottom.
Set the inside up around what you carry.
The main compartment is lined with hook-and-loop, so Nitecore modular inserts press straight in and hold where you put them. Build the layout around your own kit, then change it whenever your load changes. The inserts are sold separately, so you can pick the ones that match your gear and add them when you need them. A separate auxiliary compartment keeps a key clasp and a mesh pocket for the small things you reach for most.
The 600D polyester body shrugs off a sudden shower or a dusty track, and at roughly 190 g it adds organisation to your carry without adding noticeable weight.
WHY THE NUP30 OVER AN ORDINARY POUCH
Wear it cross-body on the included strap, mount it to a pack on the side MOLLE, or use it inside a bigger bag. A plain pouch usually carries one way only.
The hook-and-loop main compartment takes Nitecore modular inserts, so you arrange the inside around your gear rather than living with fixed pockets.
The 600D polyester body and its water and dirt resistant coating shrug off a shower and a dusty trail, where a thin unlined pouch soaks through.
Around 190 g across a 19 x 28.5 x 7.5 cm body, it adds real organising space while staying easy to wear all day.
HOW PEOPLE CARRY THE NUP30
Torch, knife, keys, cards and a power bank in one cross-body pouch, sorted by feel and ready to grab.
The water and dirt resistant body keeps small kit dry and clean on hikes, camps and fishing trips, and wipes down afterwards.
Mount it to a larger pack on the side MOLLE to keep frequently used items out where you can reach them.
Slip it inside a bigger bag so cables, a charger and small tools stay together instead of sinking to the bottom.
CAPACITY AND ORGANISATION
| COMPARTMENT | HOLDS |
| Main Compartment | Torch, knife, power bank and modular inserts |
| Auxiliary Compartment | Keys on the clasp, cards and cables in the mesh pocket |
| Front Hook-and-Loop Panel | Patches and laser-cut module mounts |
*Set up your own way
The hook-and-loop main compartment takes Nitecore modular inserts (sold separately), so you arrange the space around your own kit.SPECIFICATIONS
| Dimensions | 19 x 28.5 x 7.5 cm (7.5 x 11.2 x 3.0") |
| Weight | Approx. 190 g (listed figure) |
| Main Fabric | 600D polyester |
| Coating | Water and dirt resistant |
| Attachment | Side MOLLE webbing |
| Carry | Included adjustable cross-body strap |
| Colour | Black |
*Figures may vary
The 190 g weight is the listed figure, and dimensions may vary slightly with measuring method.FREQUENTLY ASKED QUESTIONS
The pouch has MOLLE webbing on its sides, so you can weave it onto the MOLLE or PALS webbing of a larger pack and keep it fixed in place. When you want to carry it on its own, clip on the included cross-body strap instead.
At 19 x 28.5 x 7.5 cm it suits a set of everyday kit such as a torch, a knife, keys, cards, a power bank and cables, with a key clasp and mesh pocket in the auxiliary compartment for the small items. The hook-and-loop main compartment accepts Nitecore modular inserts so you can divide the space to suit your gear. The inserts are sold separately, so the pouch arrives ready to use with the strap and you add the inserts you want.
The 600D polyester body carries a water and dirt resistant coating that handles a light shower and wipes clean after a dusty day. It is built to resist water and dirt rather than to be submerged, so treat it as splash and weather resistant.
What's In The Box
- 1x NUP30 MOLLE Utility Pouch with side MOLLE webbing and a hook-and-loop interior
- 1x Adjustable cross-body strap for standalone carry
Nitecore modular inserts are sold separately.
A tough pouch that sets up your way.
GET YOUR NUP30 NOWMore Images
NUP30 - MOLLE Utility Pouch
A tough little pouch that carries your kit and sets up your way.
Wear the NUP30 cross-body, clip it to a pack on its side MOLLE, or drop it inside a bigger bag to keep small gear sorted.
- 19 x 28.5 x 7.5 cm (7.5 x 11.2 x 3.0"), around 190 g
- 600D polyester with a water and dirt resistant coating
- Side MOLLE webbing to attach it to a larger pack
- Laser-cut hook-and-loop panel on the front for patches and small modules
- Hook-and-loop main compartment that takes Nitecore modular inserts
- Auxiliary compartment with a key clasp and a mesh pocket
- Included adjustable cross-body strap for standalone carry
Carry it three ways.
Clip the included strap on and the NUP30 rides as a cross-body sling, sitting flat against your hip so a knife, torch and snacks stay within reach on the trail. The strap adjusts in length, so it sits where you want it across the body.
The side MOLLE webbing lets you mount it to a larger pack when you want it out of the way, and the slim 7.5 cm depth means it slips inside a bigger bag as an organiser when you would rather keep small items from drifting to the bottom.
Set the inside up around what you carry.
The main compartment is lined with hook-and-loop, so Nitecore modular inserts press straight in and hold where you put them. Build the layout around your own kit, then change it whenever your load changes. The inserts are sold separately, so you can pick the ones that match your gear and add them when you need them. A separate auxiliary compartment keeps a key clasp and a mesh pocket for the small things you reach for most.
The 600D polyester body shrugs off a sudden shower or a dusty track, and at roughly 190 g it adds organisation to your carry without adding noticeable weight.
WHY THE NUP30 OVER AN ORDINARY POUCH
Wear it cross-body on the included strap, mount it to a pack on the side MOLLE, or use it inside a bigger bag. A plain pouch usually carries one way only.
The hook-and-loop main compartment takes Nitecore modular inserts, so you arrange the inside around your gear rather than living with fixed pockets.
The 600D polyester body and its water and dirt resistant coating shrug off a shower and a dusty trail, where a thin unlined pouch soaks through.
Around 190 g across a 19 x 28.5 x 7.5 cm body, it adds real organising space while staying easy to wear all day.
HOW PEOPLE CARRY THE NUP30
Torch, knife, keys, cards and a power bank in one cross-body pouch, sorted by feel and ready to grab.
The water and dirt resistant body keeps small kit dry and clean on hikes, camps and fishing trips, and wipes down afterwards.
Mount it to a larger pack on the side MOLLE to keep frequently used items out where you can reach them.
Slip it inside a bigger bag so cables, a charger and small tools stay together instead of sinking to the bottom.
CAPACITY AND ORGANISATION
| COMPARTMENT | HOLDS |
| Main Compartment | Torch, knife, power bank and modular inserts |
| Auxiliary Compartment | Keys on the clasp, cards and cables in the mesh pocket |
| Front Hook-and-Loop Panel | Patches and laser-cut module mounts |
*Set up your own way
The hook-and-loop main compartment takes Nitecore modular inserts (sold separately), so you arrange the space around your own kit.SPECIFICATIONS
| Dimensions | 19 x 28.5 x 7.5 cm (7.5 x 11.2 x 3.0") |
| Weight | Approx. 190 g (listed figure) |
| Main Fabric | 600D polyester |
| Coating | Water and dirt resistant |
| Attachment | Side MOLLE webbing |
| Carry | Included adjustable cross-body strap |
| Colour | Black |
*Figures may vary
The 190 g weight is the listed figure, and dimensions may vary slightly with measuring method.FREQUENTLY ASKED QUESTIONS
The pouch has MOLLE webbing on its sides, so you can weave it onto the MOLLE or PALS webbing of a larger pack and keep it fixed in place. When you want to carry it on its own, clip on the included cross-body strap instead.
At 19 x 28.5 x 7.5 cm it suits a set of everyday kit such as a torch, a knife, keys, cards, a power bank and cables, with a key clasp and mesh pocket in the auxiliary compartment for the small items. The hook-and-loop main compartment accepts Nitecore modular inserts so you can divide the space to suit your gear. The inserts are sold separately, so the pouch arrives ready to use with the strap and you add the inserts you want.
The 600D polyester body carries a water and dirt resistant coating that handles a light shower and wipes clean after a dusty day. It is built to resist water and dirt rather than to be submerged, so treat it as splash and weather resistant.
What's In The Box
- 1x NUP30 MOLLE Utility Pouch with side MOLLE webbing and a hook-and-loop interior
- 1x Adjustable cross-body strap for standalone carry
Nitecore modular inserts are sold separately.
A tough pouch that sets up your way.
GET YOUR NUP30 NOWProduct Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A tough little pouch that carries your kit and sets up your way.
Wear the NUP30 cross-body, clip it to a pack on its side MOLLE, or drop it inside a bigger bag to keep small gear sorted.
- 19 x 28.5 x 7.5 cm (7.5 x 11.2 x 3.0"), around 190 g
- 600D polyester with a water and dirt resistant coating
- Side MOLLE webbing to attach it to a larger pack
- Laser-cut hook-and-loop panel on the front for patches and small modules
- Hook-and-loop main compartment that takes Nitecore modular inserts
- Auxiliary compartment with a key clasp and a mesh pocket
- Included adjustable cross-body strap for standalone carry
Carry it three ways.
Clip the included strap on and the NUP30 rides as a cross-body sling, sitting flat against your hip so a knife, torch and snacks stay within reach on the trail. The strap adjusts in length, so it sits where you want it across the body.
The side MOLLE webbing lets you mount it to a larger pack when you want it out of the way, and the slim 7.5 cm depth means it slips inside a bigger bag as an organiser when you would rather keep small items from drifting to the bottom.
Set the inside up around what you carry.
The main compartment is lined with hook-and-loop, so Nitecore modular inserts press straight in and hold where you put them. Build the layout around your own kit, then change it whenever your load changes. The inserts are sold separately, so you can pick the ones that match your gear and add them when you need them. A separate auxiliary compartment keeps a key clasp and a mesh pocket for the small things you reach for most.
The 600D polyester body shrugs off a sudden shower or a dusty track, and at roughly 190 g it adds organisation to your carry without adding noticeable weight.
WHY THE NUP30 OVER AN ORDINARY POUCH
Wear it cross-body on the included strap, mount it to a pack on the side MOLLE, or use it inside a bigger bag. A plain pouch usually carries one way only.
The hook-and-loop main compartment takes Nitecore modular inserts, so you arrange the inside around your gear rather than living with fixed pockets.
The 600D polyester body and its water and dirt resistant coating shrug off a shower and a dusty trail, where a thin unlined pouch soaks through.
Around 190 g across a 19 x 28.5 x 7.5 cm body, it adds real organising space while staying easy to wear all day.
HOW PEOPLE CARRY THE NUP30
Torch, knife, keys, cards and a power bank in one cross-body pouch, sorted by feel and ready to grab.
The water and dirt resistant body keeps small kit dry and clean on hikes, camps and fishing trips, and wipes down afterwards.
Mount it to a larger pack on the side MOLLE to keep frequently used items out where you can reach them.
Slip it inside a bigger bag so cables, a charger and small tools stay together instead of sinking to the bottom.
CAPACITY AND ORGANISATION
| COMPARTMENT | HOLDS |
| Main Compartment | Torch, knife, power bank and modular inserts |
| Auxiliary Compartment | Keys on the clasp, cards and cables in the mesh pocket |
| Front Hook-and-Loop Panel | Patches and laser-cut module mounts |
*Set up your own way
The hook-and-loop main compartment takes Nitecore modular inserts (sold separately), so you arrange the space around your own kit.SPECIFICATIONS
| Dimensions | 19 x 28.5 x 7.5 cm (7.5 x 11.2 x 3.0") |
| Weight | Approx. 190 g (listed figure) |
| Main Fabric | 600D polyester |
| Coating | Water and dirt resistant |
| Attachment | Side MOLLE webbing |
| Carry | Included adjustable cross-body strap |
| Colour | Black |
*Figures may vary
The 190 g weight is the listed figure, and dimensions may vary slightly with measuring method.FREQUENTLY ASKED QUESTIONS
The pouch has MOLLE webbing on its sides, so you can weave it onto the MOLLE or PALS webbing of a larger pack and keep it fixed in place. When you want to carry it on its own, clip on the included cross-body strap instead.
At 19 x 28.5 x 7.5 cm it suits a set of everyday kit such as a torch, a knife, keys, cards, a power bank and cables, with a key clasp and mesh pocket in the auxiliary compartment for the small items. The hook-and-loop main compartment accepts Nitecore modular inserts so you can divide the space to suit your gear. The inserts are sold separately, so the pouch arrives ready to use with the strap and you add the inserts you want.
The 600D polyester body carries a water and dirt resistant coating that handles a light shower and wipes clean after a dusty day. It is built to resist water and dirt rather than to be submerged, so treat it as splash and weather resistant.
What's In The Box
- 1x NUP30 MOLLE Utility Pouch with side MOLLE webbing and a hook-and-loop interior
- 1x Adjustable cross-body strap for standalone carry
Nitecore modular inserts are sold separately.
